- Hot item Products covid19
- HITACHI HIKOKI PROFESSIONAL POWER TOOLS
- Belt Sander
- Blowers
- Circular Saws
- Compound Mitre Saws
- Demolition Hammers
- Disc Grinders with Slide Switches
- Disc Grinders with Trigger Switch
- Disc Sander
- Drills
- Grasstrimmer
- Heat Guns
- Hedgetrimmer
- High Pressure Washers
- High-Speed Cut-off Machine
- Jig Saws
- Lawnmover
- Nibbler
- Orbital Sanders
- Polisher
- Reciprocating Saw
- Rotary Hammer(SDS-max)
- Router
- Sander Polishers
- Shear
- Slide Compound Mitre Saw
- Straight Grinders
- Workstation for Mitre Saws
- BUILDING SUPPLIES & MATERIALS
- HARDWARE TOOLS
- HITZ PRODUCTS LASER & TILES CUTTER
- KITCHEN & BATHROOM
- LIGHTING & ELECTRICAL
- PAINTING & BRUSH
- PLUMBING
- SAFETY JOGGER BRAND
- TOOLS & EQUIPMENTS
- WD 40 ALL PRODUCTS SERIES
DJ Hardware Trading (M) Sdn Bhd
Lot 2694, Jalan Besar,
Kampung Baru Sg. Buloh,
47000 Selangor,
Malaysia.
+603-6157 7473
+603-6144 6026
EXPANDED METAL BRICKWORK REINFORCEMENT MESH (WS)
Previous | 156 / 160 | Next |
Building Materials/Expanded Metal, Mesh & Lath
Brickwork Reinforcement Mesh (Ex-Mesh)
Preface
Reinforced brickwork is preferable to un-reinforced brickwork in all types of buildings.
When embedded into the normal thickness of a brickwork-joint at every third joint, it forms an integral structure, which is strengthened against vibration, temperature change and tensional stresses (especially on reclaimed ground).
Advantages
- It is expanded steel mesh with continuity of steel.
- It has no joints, welds or interweaving to fail under stress.
- The mesh is anchored immovably so that the reinforcement cannot slip under tension.
- This is the only type of brickwork reinforcement to give such a unique combination of all these advantages.
Laying Instructions
- The mesh should be laid flat and set in the brickwork-joints. The reinforcement must be completely embedded in mortar.
- To be assured of its effectiveness, it is normally laid on every third brickwork-joint.
- Overlapping must be at least 75mm (3'').